diff options
Diffstat (limited to 'autoload/syntaxcomplete.vim')
| -rw-r--r-- | autoload/syntaxcomplete.vim | 759 |
1 files changed, 759 insertions, 0 deletions
diff --git a/autoload/syntaxcomplete.vim b/autoload/syntaxcomplete.vim new file mode 100644 index 00000000..5b57480f --- /dev/null +++ b/autoload/syntaxcomplete.vim @@ -0,0 +1,759 @@ +if !exists('g:polyglot_disabled') || index(g:polyglot_disabled, 'vim') == -1 + +" Vim completion script +" Language: All languages, uses existing syntax highlighting rules +" Maintainer: David Fishburn <dfishburn dot vim at gmail dot com> +" Version: 13.0 +" Last Change: 2013 May 14 +" Usage: For detailed help, ":help ft-syntax-omni" + +" History +" +" Version 13.0 +" - Extended the option omni_syntax_group_include_{filetype} +" to accept a comma separated list of regex's rather than +" string. For example, for the javascript filetype you could +" use: +" let g:omni_syntax_group_include_javascript = 'javascript\w\+,jquery\w\+' +" - Some syntax files (perl.vim) use the match // syntax as a mechanism +" to identify keywords. This update attempts to parse the +" match syntax and pull out syntax items which are at least +" 3 words or more. +" +" Version 12.0 +" - It is possible to have '-' as part of iskeyword, when +" checking for character ranges, tighten up the regex. +" E688: More targets than List items. +" +" Version 11.0 +" - Corrected which characters required escaping during +" substitution calls. +" +" Version 10.0 +" - Cycle through all the character ranges specified in the +" iskeyword option and build a list of valid word separators. +" Prior to this change, only actual characters were used, +" where for example ASCII "45" == "-". If "45" were used +" in iskeyword the hyphen would not be picked up. +" This introduces a new option, since the character ranges +" specified could be multibyte: +" let g:omni_syntax_use_single_byte = 1 +" - This by default will only allow single byte ASCII +" characters to be added and an additional check to ensure +" the charater is printable (see documentation for isprint). +" +" Version 9.0 +" - Add the check for cpo. +" +" Version 8.0 +" - Updated SyntaxCSyntaxGroupItems() +" - Some additional syntax items were also allowed +" on nextgroup= lines which were ignored by default. +" Now these lines are processed independently. +" +" Version 7.0 +" - Updated syntaxcomplete#OmniSyntaxList() +" - Looking up the syntax groups defined from a syntax file +" looked for only 1 format of {filetype}GroupName, but some +" syntax writers use this format as well: +" {b:current_syntax}GroupName +" - OmniSyntaxList() will now check for both if the first +" method does not find a match. +" +" Version 6.0 +" - Added syntaxcomplete#OmniSyntaxList() +" - Allows other plugins to use this for their own +" purposes. +" - It will return a List of all syntax items for the +" syntax group name passed in. +" - XPTemplate for SQL will use this function via the +" sqlcomplete plugin to populate a Choose box. +" +" Version 5.0 +" - Updated SyntaxCSyntaxGroupItems() +" - When processing a list of syntax groups, the final group +" was missed in function SyntaxCSyntaxGroupItems. +" +" Set completion with CTRL-X CTRL-O to autoloaded function. +" This check is in place in case this script is +" sourced directly instead of using the autoload feature. +if exists('+omnifunc') + " Do not set the option if already set since this + " results in an E117 warning. + if &omnifunc == "" + setlocal omnifunc=syntaxcomplete#Complete + endif +endif + +if exists('g:loaded_syntax_completion') + finish +endif +let g:loaded_syntax_completion = 130 + +" Turn on support for line continuations when creating the script +let s:cpo_save = &cpo +set cpo&vim + +" Set ignorecase to the ftplugin standard +" This is the default setting, but if you define a buffer local +" variable you can override this on a per filetype. +if !exists('g:omni_syntax_ignorecase') + let g:omni_syntax_ignorecase = &ignorecase +endif + +" Indicates whether we should use the iskeyword option to determine +" how to split words. +" This is the default setting, but if you define a buffer local +" variable you can override this on a per filetype. +if !exists('g:omni_syntax_use_iskeyword') + let g:omni_syntax_use_iskeyword = 1 +endif + +" When using iskeyword, this setting controls whether the characters +" should be limited to single byte characters. +if !exists('g:omni_syntax_use_single_byte') + let g:omni_syntax_use_single_byte = 1 +endif + +" When using iskeyword, this setting controls whether the characters +" should be limited to single byte characters. +if !exists('g:omni_syntax_use_iskeyword_numeric') + let g:omni_syntax_use_iskeyword_numeric = 1 +endif + +" Only display items in the completion window that are at least +" this many characters in length. +" This is the default setting, but if you define a buffer local +" variable you can override this on a per filetype. +if !exists('g:omni_syntax_minimum_length') + let g:omni_syntax_minimum_length = 0 +endif + +" This script will build a completion list based on the syntax +" elements defined by the files in $VIMRUNTIME/syntax. +" let s:syn_remove_words = 'match,matchgroup=,contains,'. +let s:syn_remove_words = 'matchgroup=,contains,'. + \ 'links to,start=,end=' + " \ 'links to,start=,end=,nextgroup=' + +let s:cache_name = [] +let s:cache_list = [] +let s:prepended = '' + +" This function is used for the 'omnifunc' option. +function! syntaxcomplete#Complete(findstart, base) + + " Only display items in the completion window that are at least + " this many characters in length + if !exists('b:omni_syntax_ignorecase') + if exists('g:omni_syntax_ignorecase') + let b:omni_syntax_ignorecase = g:omni_syntax_ignorecase + else + let b:omni_syntax_ignorecase = &ignorecase + endif + endif + + if a:findstart + " Locate the start of the item, including "." + let line = getline('.') + let start = col('.') - 1 + let lastword = -1 + while start > 0 + " if line[start - 1] =~ '\S' + " let start -= 1 + " elseif line[start - 1] =~ '\.' + if line[start - 1] =~ '\k' + let start -= 1 + let lastword = a:findstart + else + break + endif + endwhile + + " Return the column of the last word, which is going to be changed. + " Remember the text that comes before it in s:prepended. + if lastword == -1 + let s:prepended = '' + return start + endif + let s:prepended = strpart(line, start, (col('.') - 1) - start) + return start + endif + + " let base = s:prepended . a:base + let base = s:prepended + + let filetype = substitute(&filetype, '\.', '_', 'g') + let list_idx = index(s:cache_name, filetype, 0, &ignorecase) + if list_idx > -1 + let compl_list = s:cache_list[list_idx] + else + let compl_list = OmniSyntaxList() + let s:cache_name = add( s:cache_name, filetype ) + let s:cache_list = add( s:cache_list, compl_list ) + endif + + " Return list of matches. + + if base != '' + " let compstr = join(compl_list, ' ') + " let expr = (b:omni_syntax_ignorecase==0?'\C':'').'\<\%('.base.'\)\@!\w\+\s*' + " let compstr = substitute(compstr, expr, '', 'g') + " let compl_list = split(compstr, '\s\+') + + " Filter the list based on the first few characters the user + " entered + let expr = 'v:val '.(g:omni_syntax_ignorecase==1?'=~?':'=~#')." '^".escape(base, '\\/.*$^~[]').".*'" + let compl_list = filter(deepcopy(compl_list), expr) + endif + + return compl_list +endfunc + +function! syntaxcomplete#OmniSyntaxList(...) + if a:0 > 0 + let parms = [] + if 3 == type(a:1) + let parms = a:1 + elseif 1 == type(a:1) + let parms = split(a:1, ',') + endif + return OmniSyntaxList( parms ) + else + return OmniSyntaxList() + endif +endfunc + +function! OmniSyntaxList(...) + let list_parms = [] + if a:0 > 0 + if 3 == type(a:1) + let list_parms = a:1 + elseif 1 == type(a:1) + let list_parms = split(a:1, ',') + endif + endif + + " Default to returning a dictionary, if use_dictionary is set to 0 + " a list will be returned. + " let use_dictionary = 1 + " if a:0 > 0 && a:1 != '' + " let use_dictionary = a:1 + " endif + + " Only display items in the completion window that are at least + " this many characters in length + if !exists('b:omni_syntax_use_iskeyword') + if exists('g:omni_syntax_use_iskeyword') + let b:omni_syntax_use_iskeyword = g:omni_syntax_use_iskeyword + else + let b:omni_syntax_use_iskeyword = 1 + endif + endif + + " Only display items in the completion window that are at least + " this many characters in length + if !exists('b:omni_syntax_minimum_length') + if exists('g:omni_syntax_minimum_length') + let b:omni_syntax_minimum_length = g:omni_syntax_minimum_length + else + let b:omni_syntax_minimum_length = 0 + endif + endif + + let saveL = @l + let filetype = substitute(&filetype, '\.', '_', 'g') + + if empty(list_parms) + " Default the include group to include the requested syntax group + let syntax_group_include_{filetype} = '' + " Check if there are any overrides specified for this filetype + if exists('g:omni_syntax_group_include_'.filetype) + let syntax_group_include_{filetype} = + \ substitute( g:omni_syntax_group_include_{filetype},'\s\+','','g') + let list_parms = split(g:omni_syntax_group_include_{filetype}, ',') + if syntax_group_include_{filetype} =~ '\w' + let syntax_group_include_{filetype} = + \ substitute( syntax_group_include_{filetype}, + \ '\s*,\s*', '\\|', 'g' + \ ) + endif + endif + else + " A specific list was provided, use it + endif + + " Loop through all the syntax groupnames, and build a + " syntax file which contains these names. This can + " work generically for any filetype that does not already + " have a plugin defined. + " This ASSUMES the syntax groupname BEGINS with the name + " of the filetype. From my casual viewing of the vim7\syntax + " directory this is true for almost all syntax definitions. + " As an example, the SQL syntax groups have this pattern: + " sqlType + " sqlOperators + " sqlKeyword ... + if !empty(list_parms) && empty(substitute(join(list_parms), '[a-zA-Z ]', '', 'g')) + " If list_parms only includes word characters, use it to limit + " the syntax elements. + " If using regex syntax list will fail to find those items, so + " simply grab the who syntax list. + redir @l + silent! exec 'syntax list '.join(list_parms) + redir END + else + redir @l + silent! exec 'syntax list' + redir END + endif + + let syntax_full = "\n".@l + let @l = saveL + + if syntax_full =~ 'E28' + \ || syntax_full =~ 'E411' + \ || syntax_full =~ 'E415' + \ || syntax_full =~ 'No Syntax items' + return [] + endif + + let filetype = substitute(&filetype, '\.', '_', 'g') + + let list_exclude_groups = [] + if a:0 > 0 + " Do nothing since we have specific a specific list of groups + else + " Default the exclude group to nothing + let syntax_group_exclude_{filetype} = '' + " Check if there are any overrides specified for this filetype + if exists('g:omni_syntax_group_exclude_'.filetype) + let syntax_group_exclude_{filetype} = + \ substitute( g:omni_syntax_group_exclude_{filetype},'\s\+','','g') + let list_exclude_groups = split(g:omni_syntax_group_exclude_{filetype}, ',') + if syntax_group_exclude_{filetype} =~ '\w' + let syntax_group_exclude_{filetype} = + \ substitute( syntax_group_exclude_{filetype}, + \ '\s*,\s*', '\\|', 'g' + \ ) + endif + endif + endif + + if empty(list_parms) + let list_parms = [&filetype.'\w\+'] + endif + + let syn_list = '' + let index = 0 + for group_regex in list_parms + " Sometimes filetypes can be composite names, like c.doxygen + " Loop through each individual part looking for the syntax + " items specific to each individual filetype. + " let ftindex = 0 + " let ftindex = match(syntax_full, group_regex, ftindex) + + " while ftindex > -1 + " let ft_part_name = matchstr( syntax_full, '\w\+', ftindex ) + + " Syntax rules can contain items for more than just the current + " filetype. They can contain additional items added by the user + " via autocmds or their vimrc. + " Some syntax files can be combined (html, php, jsp). + " We want only items that begin with the filetype we are interested in. + let next_group_regex = '\n' . + \ '\zs'.group_regex.'\ze'. + \ '\s\+xxx\s\+' + let index = match(syntax_full, next_group_regex, index) + + " For the matched group name, strip off any of the regex special + " characters and see if we get a match with the current syntax + if index == -1 && exists('b:current_syntax') && substitute(group_regex, '[^a-zA-Z ]\+.*', '', 'g') !~ '^'.b:current_syntax + " There appears to be two standards when writing syntax files. + " Either items begin as: + " syn keyword {filetype}Keyword values ... + " let b:current_syntax = "sql" + " let b:current_syntax = "sqlanywhere" + " Or + " syn keyword {syntax_filename}Keyword values ... + " let b:current_syntax = "mysql" + " So, we will make the format of finding the syntax group names + " a bit more flexible and look for both if the first fails to + " find a match. + let next_group_regex = '\n' . + \ '\zs'.b:current_syntax.'\w\+\ze'. + \ '\s\+xxx\s\+' + let index = 0 + let index = match(syntax_full, next_group_regex, index) + endif + + while index > -1 + let group_name = matchstr( syntax_full, '\w\+', index ) + + let get_syn_list = 1 + for exclude_group_name in list_exclude_groups + if '\<'.exclude_group_name.'\>' =~ '\<'.group_name.'\>' + let get_syn_list = 0 + endif + endfor + + " This code is no longer needed in version 6.0 since we have + " augmented the syntax list command to only retrieve the syntax + " groups we are interested in. + " + " if get_syn_list == 1 + " if syntax_group_include_{filetype} != '' + " if '\<'.syntax_group_include_{filetype}.'\>' !~ '\<'.group_name.'\>' + " let get_syn_list = 0 + " endif + " endif + " endif + + if get_syn_list == 1 + " Pass in the full syntax listing, plus the group name we + " are interested in. + let extra_syn_list = s:SyntaxCSyntaxGroupItems(group_name, syntax_full) + let syn_list = syn_list . extra_syn_list . "\n" + endif + + let index = index + strlen(group_name) + let index = match(syntax_full, next_group_regex, index) + endwhile + + " let ftindex = ftindex + len(ft_part_name) + " let ftindex = match( syntax_full, group_regex, ftindex ) + " endwhile + endfor + +" " Sometimes filetypes can be composite names, like c.doxygen +" " Loop through each individual part looking for the syntax +" " items specific to each individual filetype. +" let syn_list = '' +" let ftindex = 0 +" let ftindex = match(&filetype, '\w\+', ftindex) + +" while ftindex > -1 +" let ft_part_name = matchstr( &filetype, '\w\+', ftindex ) + +" " Syntax rules can contain items for more than just the current +" " filetype. They can contain additional items added by the user +" " via autocmds or their vimrc. +" " Some syntax files can be combined (html, php, jsp). +" " We want only items that begin with the filetype we are interested in. +" let next_group_regex = '\n' . +" \ '\zs'.ft_part_name.'\w\+\ze'. +" \ '\s\+xxx\s\+' +" let index = 0 +" let index = match(syntax_full, next_group_regex, index) + +" if index == -1 && exists('b:current_syntax') && ft_part_name != b:current_syntax +" " There appears to be two standards when writing syntax files. +" " Either items begin as: +" " syn keyword {filetype}Keyword values ... +" " let b:current_syntax = "sql" +" " let b:current_syntax = "sqlanywhere" +" " Or +" " syn keyword {syntax_filename}Keyword values ... +" " let b:current_syntax = "mysql" +" " So, we will make the format of finding the syntax group names +" " a bit more flexible and look for both if the first fails to +" " find a match. +" let next_group_regex = '\n' . +" \ '\zs'.b:current_syntax.'\w\+\ze'. +" \ '\s\+xxx\s\+' +" let index = 0 +" let index = match(syntax_full, next_group_regex, index) +" endif + +" while index > -1 +" let group_name = matchstr( syntax_full, '\w\+', index ) + +" let get_syn_list = 1 +" for exclude_group_name in list_exclude_groups +" if '\<'.exclude_group_name.'\>' =~ '\<'.group_name.'\>' +" let get_syn_list = 0 +" endif +" endfor + +" " This code is no longer needed in version 6.0 since we have +" " augmented the syntax list command to only retrieve the syntax +" " groups we are interested in. +" " +" " if get_syn_list == 1 +" " if syntax_group_include_{filetype} != '' +" " if '\<'.syntax_group_include_{filetype}.'\>' !~ '\<'.group_name.'\>' +" " let get_syn_list = 0 +" " endif +" " endif +" " endif + +" if get_syn_list == 1 +" " Pass in the full syntax listing, plus the group name we +" " are interested in. +" let extra_syn_list = s:SyntaxCSyntaxGroupItems(group_name, syntax_full) +" let syn_list = syn_list . extra_syn_list . "\n" +" endif + +" let index = index + strlen(group_name) +" let index = match(syntax_full, next_group_regex, index) +" endwhile + +" let ftindex = ftindex + len(ft_part_name) +" let ftindex = match( &filetype, '\w\+', ftindex ) +" endwhile + + " Convert the string to a List and sort it. + let compl_list = sort(split(syn_list)) + + if &filetype == 'vim' + let short_compl_list = [] + for i in range(len(compl_list)) + if i == len(compl_list)-1 + let next = i + else + let next = i + 1 + endif + if compl_list[next] !~ '^'.compl_list[i].'.$' + let short_compl_list += [compl_list[i]] + endif + endfor + + return short_compl_list + else + return compl_list + endif +endfunction + +function! s:SyntaxCSyntaxGroupItems( group_name, syntax_full ) + + let syn_list = "" + + " From the full syntax listing, strip out the portion for the + " request group. + " Query: + " \n - must begin with a newline + " a:group_name - the group name we are interested in + " \s\+xxx\s\+ - group names are always followed by xxx + " \zs - start the match + " .\{-} - everything ... + " \ze - end the match + " \( - start a group or 2 potential matches + " \n\w - at the first newline starting with a character + " \| - 2nd potential match + " \%$ - matches end of the file or string + " \) - end a group + let syntax_group = matchstr(a:syntax_full, + \ "\n".a:group_name.'\s\+xxx\s\+\zs.\{-}\ze\(\n\w\|\%$\)' + \ ) + + if syntax_group != "" + " let syn_list = substitute( @l, '^.*xxx\s*\%(contained\s*\)\?', "", '' ) + " let syn_list = substitute( @l, '^.*xxx\s*', "", '' ) + + " We only want the words for the lines begining with + " containedin, but there could be other items. + + " Tried to remove all lines that do not begin with contained + " but this does not work in all cases since you can have + " contained nextgroup=... + " So this will strip off the ending of lines with known + " keywords. + let syn_list = substitute( + \ syntax_group, '\<\('. + \ substitute( + \ escape(s:syn_remove_words, '\\/.*$^~[]') + \ , ',', '\\|', 'g' + \ ). + \ '\).\{-}\%($\|'."\n".'\)' + \ , "\n", 'g' + \ ) + + " Attempt to deal with lines using the match syntax + " javaScriptDocTags xxx match /@\(param\|argument\|requires\|file\)\>/ + " Though it can use any types of regex, so this plugin will attempt + " to restrict it + " 1. Only use \( or \%( constructs remove all else + " 2 Remove and []s + " 3. Account for match //constructs + " \%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\? + " 4. Hope for the best + " + " + let syn_list_old = syn_list + while syn_list =~ '\<match\>\s\+\/' + if syn_list =~ 'perlElseIfError' + let syn_list = syn_list + endif + " Check if the match has words at least 3 characters long + if syn_list =~ '\<match \/\zs.\{-}\<\w\{3,}\>.\{-}\ze\\\@<!\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+' + " Remove everything after / and before the first \( + let syn_list = substitute( syn_list, '\<match \/\zs.\{-}\ze\\%\?(.\{-}\\\@<!\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+', '', 'g' ) + " Remove everything after \) and up to the ending / + let syn_list = substitute( syn_list, '\<match \/.\{-}\\)\zs.\{-}\ze\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+', '', 'g' ) + + " Remove any character classes + " let syn_list = substitute( syn_list, '\<match /\zs.\{-}\[[^]]*\].\{-}\ze\/ ', '', 'g' ) + let syn_list = substitute( syn_list, '\%(\<match \/[^/]\{-}\)\@<=\[[^]]*\]\ze.\{-}\\\@<!\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?', '', 'g' ) + " Remove any words < 3 characters + let syn_list = substitute( syn_list, '\%(\<match \/[^/]\{-}\)\@<=\<\w\{1,2}\>\ze.\{-}\\\@<!\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+', '', 'g' ) + " Remove all non-word characters + " let syn_list = substitute( syn_list, '\<match /\zs.\{-}\<\W\+\>.\{-}\ze\/ ', "", 'g' ) + " let syn_list = substitute( syn_list, '\%(\<match \/[^/]\{-}\)\@<=\W\+\ze.\{-}\/ ', ' ', 'g' ) + " Do this by using the outer substitue() call to gather all + " text between the match /.../ tags. + " The inner substitute() call operates on the text selected + " and replaces all non-word characters. + let syn_list = substitute( syn_list, '\<match \/\zs\(.\{-}\)\ze\\\@<!\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+' + \ , '\=substitute(submatch(1), "\\W\\+", " ", "g")' + \ , 'g' ) + " Remove the match / / syntax + let syn_list = substitute( syn_list, '\<match \/\(.\{-}\)\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+', '\1', 'g' ) + else + " No words long enough, remove the match + " Remove the match syntax + " let syn_list = substitute( syn_list, '\<match \/[^\/]*\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+', '', 'g' ) + let syn_list = substitute( syn_list, '\<match \/\%(.\{-}\)\?\/\%(\%(ms\|me\|hs\|he\|rs\|re\|lc\)\S\+\)\?\s\+', '', 'g' ) + endif + if syn_list =~ '\<match\>\s\+\/' + " Problem removing the match / / tags + let syn_list = '' + endif + endwhile + + + " Now strip off the newline + blank space + contained. + " Also include lines with nextgroup=@someName skip_key_words syntax_element + " \ syn_list, '\%(^\|\n\)\@<=\s*\<\(contained\|nextgroup=\)' + " \ syn_list, '\%(^\|\n\)\@<=\s*\<\(contained\|nextgroup=[@a-zA-Z,]*\)' + let syn_list = substitute( + \ syn_list, '\<\(contained\|nextgroup=[@a-zA-Z,]*\)' + \ , "", 'g' + \ ) + + " This can leave lines like this + " =@vimMenuList skipwhite onoremenu + " Strip the special option keywords first + " :h :syn-skipwhite* + let syn_list = substitute( + \ syn_list, '\<\(skipwhite\|skipnl\|skipempty\)\>' + \ , "", 'g' + \ ) + + " Now remove the remainder of the nextgroup=@someName lines + let syn_list = substitute( + \ syn_list, '\%(^\|\n\)\@<=\s*\(@\w\+\)' + \ , "", 'g' + \ ) + + if b:omni_syntax_use_iskeyword == 0 + " There are a number of items which have non-word characters in + " them, *'T_F1'*. vim.vim is one such file. + " This will replace non-word characters with spaces. + let syn_list = substitute( syn_list, '[^0-9A-Za-z_ ]', ' ', 'g' ) + else + if g:omni_syntax_use_iskeyword_numeric == 1 + " iskeyword can contain value like this + " 38,42,43,45,47-58,60-62,64-90,97-122,_,+,-,*,/,%,<,=,>,:,$,?,!,@-@,94 + " Numeric values convert to their ASCII equivalent using the + " nr2char() function. + " & 38 + " * 42 + " + 43 + " - 45 + " ^ 94 + " Iterate through all numeric specifications and convert those + " to their ascii equivalent ensuring the character is printable. + " If so, add it to the list. + let accepted_chars = '' + for item in split(&iskeyword, ',') + if item =~ '\d-\d' + " This is a character range (ie 47-58), + " cycle through each character within the range + let [b:start, b:end] = split(item, '-') + for range_item in range( b:start, b:end ) + if range_item <= 127 || g:omni_syntax_use_single_byte == 0 + if nr2char(range_item) =~ '\p' + let accepted_chars = accepted_chars . nr2char(range_item) + endif + endif + endfor + elseif item =~ '^\d\+$' + " Only numeric, translate to a character + if item < 127 || g:omni_syntax_use_single_byte == 0 + if nr2char(item) =~ '\p' + let accepted_chars = accepted_chars . nr2char(item) + endif + endif + else + if char2nr(item) < 127 || g:omni_syntax_use_single_byte == 0 + if item =~ '\p' + let accepted_chars = accepted_chars . item + endif + endif + endif + endfor + " Escape special regex characters + " Looks like the wrong chars are escaped. In a collection, + " :h /[] + " only `]', `\', `-' and `^' are special: + " let accepted_chars = escape(accepted_chars, '\\/.*$^~[]' ) + let accepted_chars = escape(accepted_chars, ']\-^' ) + " Remove all characters that are not acceptable + let syn_list = substitute( syn_list, '[^A-Za-z'.accepted_chars.']', ' ', 'g' ) + else + let accept_chars = ','.&iskeyword.',' + " Remove all character ranges + " let accept_chars = substitute(accept_chars, ',[^,]\+-[^,]\+,', ',', 'g') + let accept_chars = substitute(accept_chars, ',\@<=[^,]\+-[^,]\+,', '', 'g') + " Remove all numeric specifications + " let accept_chars = substitute(accept_chars, ',\d\{-},', ',', 'g') + let accept_chars = substitute(accept_chars, ',\@<=\d\{-},', '', 'g') + " Remove all commas + let accept_chars = substitute(accept_chars, ',', '', 'g') + " Escape special regex characters + " Looks like the wrong chars are escaped. In a collection, + " :h /[] + " only `]', `\', `-' and `^' are special: + " let accept_chars = escape(accept_chars, '\\/.*$^~[]' ) + let accept_chars = escape(accept_chars, ']\-^' ) + " Remove all characters that are not acceptable + let syn_list = substitute( syn_list, '[^0-9A-Za-z_'.accept_chars.']', ' ', 'g' ) + endif + endif + + if b:omni_syntax_minimum_length > 0 + " If the user specified a minimum length, enforce it + let syn_list = substitute(' '.syn_list.' ', ' \S\{,'.b:omni_syntax_minimum_length.'}\ze ', ' ', 'g') + endif + else + let syn_list = '' + endif + + return syn_list +endfunction + +function! OmniSyntaxShowChars(spec) + let result = [] + for item in split(a:spec, ',') + if len(item) > 1 + if item == '@-@' + call add(result, char2nr(item)) + else + call extend(result, call('range', split(item, '-'))) + endif + else + if item == '@' " assume this is [A-Za-z] + for [c1, c2] in [['A', 'Z'], ['a', 'z']] + call extend(result, range(char2nr(c1), char2nr(c2))) + endfor + else + call add(result, char2nr(item)) + endif + endif + endfor + return join(map(result, 'nr2char(v:val)'), ', ') +endfunction +let &cpo = s:cpo_save +unlet s:cpo_save + +endif |