| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is mainly done to keep the top working directory (where the
Makefile lives) cleaner.
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
This branch brings some conveniences to the semantics behind Symtbl base
values.
* sploit/symtbl-base:
sploit: rev: Properly base Symtbls for non-PIC binaries
sploit: Fix bugs involving Symtbl base value
sploit: mem: Allow Symtbl base to be modified
|
|
This branch provides some payload-specific upgrades that have come out
of the development so far on the automated ROP chain builder.
* sploit/payload-rop-prep:
sploit: payload: Promote private methods to "protected" access
sploit: payload: Clean up automatic symbol naming
sploit: payload: Class no longer extends Symtbl
sploit: payload: Allow variadic insertions
|
|
The baddr property identified by r2 is now used as the base address for
ELF symbol tables. This should not change the addresses retrieved via
the table normally, however should fix the internal offsets of the table
so that rebasing makes sense.
Note that for PIC/PIE binaries we would already get a Symtbl with
'correct' offsets, as r2 is unable to absolutely resolve them for us.
In these cases, the Symtbl base value remains at zero.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Some code previously assumed a Symtbl's base value to always be zero.
This was often the case, however the assumption would break (for example)
when attempting to rebase() a mapped Symtbl.
As of the previous patch enabling freer modification of base, the
potentiality of these bugs will be higher.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Allow a Symtbl's base to be modified in-place, without mapping into a
new object. This is useful when working with the Symtbl aspect of a
Payload.
This includes setting a non-zero base on construction. As usual, when
defining base on construction, any additional kwargs symbols are
interpreted relative to the given base. The order of arguments does not
matter.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Lift restriction (name mangling) to Payload helper functions, as their
use will be useful in Payload subclasses.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
This is just a slight code reduction, but will make any future code
simpler as well. Explicit comparision to None is more correct as well;
centralizing this for reuse better justifies the wordier if statement.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Given the current design of Symtbl, creating subclasses of it gets more
tedious the further one goes down a potential class hierarchy. As I am
planning to introduce new features in the future that explicitly extend
Payload, make this change now to minimize the impact.
Additionally, switching Payload's relationship with Symtbl from "is-a"
to "has-a" makes it more consistent with rev.ELF, the other major user
of Symtbl. (And in both cases, the member is named 'sym')
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Often times, users of the Payload module wish to push a list of integers
to a payload buffer. Currently, the best (and intended) way to do this
is to make several calls to .int(). However, as part of the ROP effort,
I am planning to add function 'gadget(addr, *params)' to the Payload
class. Per the design of this function, calling it with an expanded
list of values would be equivalent to passing each to .int()
individually. In order to discourage the use of .gadget(), as a
shortcut to a series of .int()s, .int(), and most other insertion
functions, now accept arbitrarily many value arguments.
Functions that support additional options (such as .int()'s 'signed'
parameter) will apply such options to all values. If a symbol name is
defined, it will reference the beginning of the block of values.
Keep in mind, this will also allow inserting zero values. For example,
obj.bin(sym='end') will tag the end of the payload without extending its
content. This use-case is not intended to be particularly useful, but
exists as a consequence of the change.
Payload.rep() and the pad functions are not affected by this commit, as
I don't think changing their semantics in this way makes sense.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
* malf-angstrom-2022:
Writeup angstromCTF 2022 / whatsmyname
Writeup angstromCTF 2022 / uninspired
Writeup angstromCTF 2022 / baby3
Writeup angstromCTF 2022 / Auth Skip
angstromCTF 2022 results
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
These patches correct some issues I've run into using the interactive
workflow in Sploit during picoCTF.
* sploit/interactive-fixes:
sploit: Allow multiple reads in Comm.readall_nonblock()
sploit: Fix units for Comm.timeout
|
|
Due to line buffering, we may often trigger a burst of data to be sent
by the target, but resolve the non-blocking read only after the first
line is received. We would like to wait just a little longer to receive
the entire burst instead.
readall_nonblock() will now reset its timeout period whenever any data
becomes readable and will not return until we go an entire period of
silence. Under normal conditions, the full duration of readall_nonblock
should barely be any longer than the defined period itself.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
select's poll.poll() function expects its timeout argument to be in
milliseconds. This is an artifact from earlier developent where we were
using the higher-level 'selectors' API, which never got merged.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Add indirection to arch access
* tag 'pull-sploit-arch-fix' of https://github.com/Dusoleil/lib-des-gnux:
Add indirection to arch access
|
|
* malf-pico-2022:
picoCTF 2022 results
Add signal and coredump tips to gdb document
Add writeup for picoCTF 2022 / unpackme
Add writeup for picoCTF 2022 / Eavesdrop
Add writeup for picoCTF 2022 / Wizardlike
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Signed-off-by: Malfurious <m@lfurio.us>
|
|
Add a layer of indirection to access the active arch config.
Currently when importing sploit.arch.arch, the name will be bound to
whatever the current reference is and won't follow if another module
(user script) updates the reference in sploit.arch. A layer of
indirection seemlessly solves that issue and also provides a cleaner
interface for setting the active arch from the user script.
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
The design/implementation of class Payload is updated for better
compatibility with Symtbl, and to address some usability issues that
have come up so far:
No more automatically fixed-up stack alignment by default: In fact,
alignment as a concept is fully removed from the tool, in preparation
for another upcoming ROP-centric addon to Payload. Therefore, insertion
of return addresses (via .ret()) are now equivalent to any other integer
value.
No instance size value: Each call to .pad() uses an independent size
passed as a parameter, but functions in the same manor as before.
Padding can also now be inserted at the beginning of the payload:
.pad_front() prepends the necessary amount of data, and updates the
tracked offsets of values that were already inserted to the payload.
Payload now directly extends Symtbl: Instead of possessing a Symtbl
member, payload objects can directly be treated as symbol tables for
things like mounting them as subtables, or mapping them to access
absolute addresses.
New call syntax to access binary data: As a shorthand, users may now
use the call syntax to get the bytes string built by the tool. If an
argument is passed, it is another byte string containing illegal bytes
that we check the built payload for. Unfortunately, the __str__ magic
func doesn't like returning bytes string; plus, that overload is already
in use for formatting the symbol table content (worth not hiding).
New semantic insertion functions: .bin(), .str() [C-style strings],
.int(), .ret(), and more. Some of these functions are direct synonyms,
however their use can provide more clarity in Sploit scripts.
Smarter default element symbol names: Instead of just using '_' as a
placeholder if no symbol name is ever given, we now uniquely name each
inserted element according to the API function that was used, then slap
on an incrementing number. An explicit name still bypasses this scheme.
Insertion functions can now be chained together: Functions previously
returned the offset/address of the inserted value. However, this
feature was seldom used, and there is now the possibility of
.pad_front() invalidating previously-returned offsets. Instead,
functional-style chaining is enabled to reduce boilerplate, and help
with quick oneliners.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Fixes some problems found in the Sploit Symtbl module, and includes some
additional cleanup suggested by dusoleil.
* sploit/symtbl-retcon:
sploit: Clean up use of __getattribute__
sploit: Fix bugs and simplify Symtbl
|
|
__getattribute__ is the low-level magic func and will intercept every
attribute lookup, whereas __getattr__ is high-level, and is only invoked
in specific conditions (such as __getattribute__'s failure).
As such, any overload of __getattribute__ which preferentially falls
back to object.__getattribute__() before serving a request, can more
simply be replaced by a __getattr__ overload without the fallback.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
The recent implementation of the new design for Symtbl contained a few
bugs:
- Attempting to access .base on a Symtbl or intermediate
__InnerTable__ caused an exception.
- Symtbl objects all used the same static collection of nested
subtables, rather than an instanced one. If two table objects
contained the same named key, they would refer to the same
nested table from both locations.
- Printing the contents of a table accessed via an absolute
nesting (aka: via an __InnerTable__ object) would not show the
offsets adjusted for the curent context.
In addition to these fixes, the class implementation is largely
simplified as well. This is in part due to the removal of unnecessary
logic, such as the way our __getattribute__ overloads were implemented.
Mainly, this came down to merging the redundant abstractions in our
original design.
Over time, the differences between these interfaces became blurred to
the point where simply reusing one is not at all problematic. It is
very much the intent of this patch to preserve the semantics of the
tool's design (that being: flexable, nestable tables, to which a
separate, but linked, mapped view may be obtained), but to state it as
cleanly as possible.
Note that all of the working state of a Symtbl is kept in its new
_namesp member. This is primarily done to enable subclassing the Symtbl
class. Ordinarily, setattr() on self would force the incoming value
into the actual symbol table, making it impossible for subclasses to
store separate instance data. Furthermore, the consolidation of
properties into this object creates fewer potential collisions with
user-defined symbols.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Add rev for basic reverse engineering
* tag 'pull-sploit-rev' of https://github.com/Dusoleil/lib-des-gnux:
sploit: Move __attr_filter__ to a general place in util
sploit: Filter all magic python members by default in mem module
sploit: add stack base pointer to locals symtbl
sploit: print hex of addresses in rev logs
sploit: add status logging to rev module
sploit: lazy load libs for ELF
sploit: cache results of external commands
sploit: add the rest of r2 functions through elf
sploit: typo fix in rev.r2
sploit: cache ELF loads
sploit: add ELF helper class to rev
sploit: consolidate r2 symbol search calls
sploit: fix r2 module syntax error
sploit: reverse direction of r2 get_locals offsets
sploit: add r2 funcionality to rev module
sploit: add ldd ability to rev module
sploit: add rev module to sploit
|
|
This branch addresses some user experience issues when attempting to use
Sploit interactively, in the Python REPL (or iPython).
In particular:
- Target output is more responsive
- Setting up io plumbing is simplified
* sploit/repl-qol:
sploit: Clean up function Comm.interact()
sploit: Add function popen()
sploit: Add Comm property 'readonwrite'
sploit: Add function Comm.readall_nonblock()
|
|
The previous patches in this series have needed to utilize similar logic
as Comm.interact() throughout other parts of the Comm class. This patch
just revisits .interact() to clean up redundant code.
Co-authored-by: dusoleil <howcansocksbereal@gmail.com>
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
This is a free-function in the comm module, intended to help setup
Sploit plumbing when working in the Python interactive interpreter.
At the moment, the intended user experience in the interpreter is to err
on the side of being interactive/responsive. As such, the Comm object
returned from popen() is initialized with overridden IO settings to
prefer 'readonwrite' by default. Addtionally, any early output from the
target is also read, so that it may be immediately visible.
A consequence of this configuration is that, until readonwrite is set
False, most target output will be consumed before any .read* function
has a chance to return it. While that would be a hard showstopper for
any Sploit script, an interactive user can simply copy/paste any
important data that is produced. Given that the interpreter workflow is
likely going to be most useful for quick prototyping and recon with the
proposed rev module, I consider this tradeoff appropriate at the moment,
but will consider revisiting this if its usage is problematic.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
If readonwrite is set to True (default False), Sploit will catch up and
read all available stdin data from the target in a non-blocking fashion.
If logonread is also set to True, this data will immediately be
presented to the user whenever data is sent, but is otherwise lost (not
returned).
This mode is primarily intended for use in the interactive Python
interpreter, where it can be cumbersome to keep alternating read and
write calls when one does not care to actually record the read values.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Function should consume all available incoming data from target and
return it, however will return 'immediately' (according to a
configurable timeout) if the pipe is empty.
Signed-off-by: Malfurious <m@lfurio.us>
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Found a spot to use __attr_filter__ in the rev module, so moving it out
of mem and into a shared place (util).
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
In the various __getattribute__() overloads in the mem module, we should
filter all of the built-in magic members to do the default
object.__getattribute__() behavior. This is opposed to the earlier
stance of just caring about the ones that I saw as realistically being
called.
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
rather than cacheing ELF instantiations, just cache the results of
external commands
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
expose the rest of the rev.r2 capabilities through rev.elf
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
accidentally left the argument as "elf" instead of "binary" and had the
arguments in the wrong order
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
With recursive ELF loads, there is the possibility of loading in a heavy
ELF (like libc) multiple times. Hiding instantiation of the class
behind a factory method and caching instances should eliminate this
problem.
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Create a class which encapsulates some basic information about an ELF
file and provides a convenient interface for basic reverse engineering.
In particular, ELF automatically loads the symbol table of the given elf
file and recursively creates ELF objects for any linked libraries.
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
|
Consolidate some of the r2 calls that get combined to create the symbol
list. Instead of doing multiple calls with different greps within
radare2, just do a single call and search it in the python side. This
gives us a slight, but noticeable performance increase.
Signed-off-by: dusoleil <howcansocksbereal@gmail.com>
|
